<!DOCTYPE PATCH  SYSTEM "http://vvvv.org/versions/vvvv33beta14.dtd" >
   <PATCH locked="0" nodename="D:\Documents and Settings\CSO\Escritorio\Arduino et vvvv\Arduino Code\OUTPUT\Motor DC\Motor_DC_sms\Motor_DC_sms_help.v4p">
   <BOUNDS height="8085" left="5520" top="1230" type="Window" width="6420">
   </BOUNDS>
   <NODE componentmode="InABox" hiddenwhenlocked="0" id="15" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="750" top="5370" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="14220" top="6750" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="300" left="750" top="5370" type="Box" width="450">
   </BOUNDS>
   <PIN pinname="Minimum" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Maximum" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Slider Behavior" slicecount="1" values="Toggle">
   </PIN>
   <PIN pinname="Show Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Slider" slicecount="1" values="1">
   </PIN>
   <PIN pinname="X Input Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Y Input Value" visible="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="|2 high_low|">
   </PIN>
   </NODE>
   <NODE componentmode="InABox" hiddenwhenlocked="0" id="14" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="1995" top="4440" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="14520" top="7050" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="330" left="1995" top="4440" type="Box" width="450">
   </BOUNDS>
   <PIN pinname="Minimum" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Maximum" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Slider Behavior" slicecount="1" values="Toggle">
   </PIN>
   <PIN pinname="Show Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Slider" slicecount="1" values="1">
   </PIN>
   <PIN pinname="X Input Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Y Input Value" visible="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="|3 high_low|">
   </PIN>
   </NODE>
   <NODE componentmode="InABox" hiddenwhenlocked="0" id="13" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="3195" top="855" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="12315" top="3915" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="885" left="3195" top="855" type="Box" width="465">
   </BOUNDS>
   <PIN pinname="Minimum" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Maximum" slicecount="1" values="255">
   </PIN>
   <PIN pinname="Slider Behavior" slicecount="1" values="Slider">
   </PIN>
   <PIN pinname="Show Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Slider" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="X Input Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Y Input Value" slicecount="1" visible="1" values="88.0909090909091">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="Velocidad">
   </PIN>
   </NODE>
   <NODE componentmode="InABox" hiddenwhenlocked="0" id="12" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="2460" top="5685" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="13920" top="6450" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="330" left="2460" top="5685" type="Box" width="585">
   </BOUNDS>
   <PIN pinname="Minimum" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Maximum" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Slider Behavior" slicecount="1" values="Toggle">
   </PIN>
   <PIN pinname="Show Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Slider" slicecount="1" values="1">
   </PIN>
   <PIN pinname="X Input Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Y Input Value" slicecount="1" visible="1" values="0">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="Encendido">
   </PIN>
   </NODE>
   <NODE componentmode="InABox" hiddenwhenlocked="0" id="10" nodename="IOBox (Enumerations)">
   <BOUNDS height="0" left="4800" top="6240" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="7200" top="5085" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="240" left="4800" top="6240" type="Box" width="750">
   </BOUNDS>
   <PIN pinname="Output Enum" visible="1">
   </PIN>
   <PIN pinname="Input Enum" slicecount="1" values="COM4">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="com_port">
   </PIN>
   </NODE>
   <NODE componentmode="InABox" hiddenwhenlocked="0" id="9" nodename="IOBox (Enumerations)">
   <BOUNDS height="0" left="4215" top="5655" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="7500" top="5385" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="240" left="4215" top="5655" type="Box" width="930">
   </BOUNDS>
   <PIN pinname="Output Enum" visible="1">
   </PIN>
   <PIN pinname="Input Enum" slicecount="1" values="115200">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="|baud rate|">
   </PIN>
   </NODE>
   <NODE componentmode="Hidden" hiddenwhenlocked="0" id="8" nodename="Motor_DC_sms.v4p">
   <BOUNDS height="270" left="1140" top="6960" type="Node" width="4350">
   </BOUNDS>
   <BOUNDS height="9540" left="4350" top="1725" type="Window" width="11985">
   </BOUNDS>
   <BOUNDS left="1140" top="6960" type="Box">
   </BOUNDS>
   <PIN pinname="all_digital_on/off" visible="1">
   </PIN>
   <PIN pinname="analog_in_0" visible="1">
   </PIN>
   <PIN pinname="analog_in_1" visible="1">
   </PIN>
   <PIN pinname="analog_in_2" visible="1">
   </PIN>
   <PIN pinname="analog_in_3" visible="1">
   </PIN>
   <PIN pinname="analog_in_4" visible="1">
   </PIN>
   <PIN pinname="analog_in_5" visible="1">
   </PIN>
   <PIN pinname="analog_read_on/off" visible="1">
   </PIN>
   <PIN pinname="2_on/off" visible="1">
   </PIN>
   <PIN pinname="2 high_low" visible="1">
   </PIN>
   <PIN pinname="3_on/off" visible="1">
   </PIN>
   <PIN pinname="5_on/off" visible="1">
   </PIN>
   <PIN pinname="6 high_low" visible="1">
   </PIN>
   <PIN pinname="7 high_low" visible="1">
   </PIN>
   <PIN pinname="3 high_low" slicecount="1" visible="1" values="0">
   </PIN>
   <PIN pinname="4 high_low" visible="1">
   </PIN>
   <PIN pinname="9 high_low" visible="1">
   </PIN>
   <PIN pinname="5 high_low" visible="1">
   </PIN>
   <PIN pinname="8 high_low" visible="1">
   </PIN>
   <PIN pinname="pwm 9 value" visible="1">
   </PIN>
   <PIN pinname="4_on/off" visible="1">
   </PIN>
   <PIN pinname="6_on/off" visible="1">
   </PIN>
   <PIN pinname="7_on/off" visible="1">
   </PIN>
   <PIN pinname="8_on/off" visible="1">
   </PIN>
   <PIN pinname="pwm 9 on/off" visible="1">
   </PIN>
   <PIN pinname="10_on/off" visible="1">
   </PIN>
   <PIN pinname="pwm 11 on/off" visible="1">
   </PIN>
   <PIN pinname="11_on/off" visible="1">
   </PIN>
   <PIN pinname="12_on/off" visible="1">
   </PIN>
   <PIN pinname="13_on/off" visible="1">
   </PIN>
   <PIN pinname="pwm 10 value" visible="1">
   </PIN>
   <PIN pinname="pwm 11 value" visible="1">
   </PIN>
   <PIN pinname="send" visible="1">
   </PIN>
   <PIN pinname="baud rate" visible="1">
   </PIN>
   <PIN pinname="com_port" visible="1">
   </PIN>
   <PIN pinname="pwm 10 on/off" visible="1">
   </PIN>
   <PIN pinname="11 high_low" visible="1">
   </PIN>
   <PIN pinname="12 high_low" visible="1">
   </PIN>
   <PIN pinname="13 high_low" visible="1">
   </PIN>
   <PIN pinname="10 high_low" visible="1">
   </PIN>
   <PIN pinname="9_on/off" visible="1">
   </PIN>
   <PIN pinname="pwm 5 on/off" visible="1">
   </PIN>
   <PIN pinname="pwm 3 value" visible="1">
   </PIN>
   <PIN pinname="pwm 6 on/off" visible="1">
   </PIN>
   <PIN pinname="pwm 3 on/off" visible="1">
   </PIN>
   <PIN pinname="pwm 5 value" visible="1">
   </PIN>
   <PIN pinname="pwm 6 value" visible="1">
   </PIN>
   <PIN pinname="enable" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="8" dstpinname="3 high_low" hiddenwhenlocked="0" srcnodeid="14" srcpinname="Y Output Value">
   </LINK>
   <NODE id="7" nodename="FlipFlop (Animation)">
   <BOUNDS height="0" left="1155" top="2190" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Set" visible="1">
   </PIN>
   <PIN pinname="Reset" visible="1">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   <PIN pinname="Inverse Output" visible="1">
   </PIN>
   </NODE>
   <NODE id="6" nodename="TogEdge (Animation)">
   <BOUNDS height="270" left="1155" top="1620" type="Node" width="1245">
   </BOUNDS>
   <PIN pinname="Input" visible="1">
   </PIN>
   <PIN pinname="Up Edge" visible="1">
   </PIN>
   <PIN pinname="Down Edge" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="7" dstpinname="Set" srcnodeid="6" srcpinname="Up Edge">
   </LINK>
   <LINK dstnodeid="7" dstpinname="Reset" srcnodeid="6" srcpinname="Down Edge">
   </LINK>
   <NODE componentmode="InABox" id="5" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="420" top="3600" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="1020" top="3795" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="240" left="420" top="3600" type="Box" width="795">
   </BOUNDS>
   <PIN pinname="Y Input Value" visible="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="5" dstpinname="Y Input Value" srcnodeid="7" srcpinname="Output">
   </LINK>
   <NODE componentmode="InABox" id="4" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="1500" top="3555" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="2310" top="3525" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="240" left="1500" top="3555" type="Box" width="795">
   </BOUNDS>
   <PIN pinname="Y Input Value" visible="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="4" dstpinname="Y Input Value" srcnodeid="7" srcpinname="Inverse Output">
   </LINK>
   <NODE componentmode="InABox" id="3" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="480" top="855" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="13770" top="4560" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="420" left="480" top="855" type="Box" width="735">
   </BOUNDS>
   <PIN pinname="Minimum" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Maximum" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Slider Behavior" slicecount="1" values="Toggle">
   </PIN>
   <PIN pinname="Show Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Slider" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="X Input Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Y Input Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="Dirección_activa">
   </PIN>
   </NODE>
   <LINK dstnodeid="6" dstpinname="Input" srcnodeid="3" srcpinname="Y Output Value">
   </LINK>
   <NODE componentmode="InABox" hiddenwhenlocked="0" id="2" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="1380" top="5985" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="360" left="1380" top="5985" type="Box" width="450">
   </BOUNDS>
   <BOUNDS height="160" left="13620" top="6150" type="Window" width="215">
   </BOUNDS>
   <PIN pinname="Minimum" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Maximum" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Slider Behavior" slicecount="1" values="Toggle">
   </PIN>
   <PIN pinname="Show Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Slider" slicecount="1" values="1">
   </PIN>
   <PIN pinname="X Input Value" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Y Input Value" slicecount="1" visible="1" values="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="|Encendido o Velocidad|">
   </PIN>
   </NODE>
   <LINK dstnodeid="15" dstpinname="Y Input Value" srcnodeid="5" srcpinname="Y Output Value">
   </LINK>
   <LINK dstnodeid="14" dstpinname="Y Input Value" srcnodeid="4" srcpinname="Y Output Value">
   </LINK>
   <LINK dstnodeid="8" dstpinname="2 high_low" srcnodeid="15" srcpinname="Y Output Value">
   </LINK>
   <LINK dstnodeid="8" dstpinname="pwm 9 on/off" srcnodeid="2" srcpinname="Y Output Value">
   </LINK>
   <LINK dstnodeid="8" dstpinname="pwm 9 value" srcnodeid="13" srcpinname="Y Output Value">
   </LINK>
   <LINK dstnodeid="8" dstpinname="9 high_low" srcnodeid="12" srcpinname="Y Output Value">
   </LINK>
   <LINK dstnodeid="8" dstpinname="baud rate" srcnodeid="9" srcpinname="Output Enum">
   </LINK>
   <LINK dstnodeid="8" dstpinname="com_port" srcnodeid="10" srcpinname="Output Enum">
   </LINK>
   <NODE componentmode="InABox" id="1" nodename="IOBox (String)">
   <BOUNDS height="270" left="495" top="480" type="Node" width="4305">
   </BOUNDS>
   <BOUNDS height="270" left="495" top="480" type="Box" width="4305">
   </BOUNDS>
   <BOUNDS height="160" left="0" top="0" type="Window" width="215">
   </BOUNDS>
   <PIN pinname="Input String" slicecount="1" visible="0" values="|Haz click aqui para activar el motor y cambiar la dirección|">
   </PIN>
   <PIN pinname="Output String" visible="0">
   </PIN>
   <PIN pinname="Show Grid" slicecount="1" values="0">
   </PIN>
   </NODE>
   <NODE componentmode="InABox" id="0" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="4680" top="4530" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="12225" top="7605" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="240" left="4680" top="4530" type="Box" width="795">
   </BOUNDS>
   <PIN pinname="Descriptive Name" slicecount="1" values="enable">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="Y Input Value" slicecount="1" values="0">
   </PIN>
   </NODE>
   <LINK dstnodeid="8" dstpinname="enable" srcnodeid="0" srcpinname="Y Output Value">
   </LINK>
   </PATCH>