<!DOCTYPE PATCH  SYSTEM "http://vvvv.org/versions/vvvv33beta11.1.dtd" >
   <PATCH nodename="E:\arduino workshop\arduino+firmata\moduls\CommandsFirmata.v4p">
   <BOUNDS height="10350" left="9150" top="1005" type="Window" width="18630">
   </BOUNDS>
   <NODE componentmode="InABox" id="24" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="390" top="1215" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="13125" top="6465" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="705" left="390" top="1215" type="Box" width="5910">
   </BOUNDS>
   <PIN pinname="Minimum" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Maximum" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Slider Behavior" slicecount="1" values="Toggle">
   </PIN>
   <PIN pinname="Show Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Slider" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="Y Input Value" slicecount="14" visible="1" values="1,1,0,0,0,0,0,0,0,0,0,0,0,0">
   </PIN>
   <PIN pinname="SliceCount Mode" slicecount="1" values="ColsRowsPages">
   </PIN>
   <PIN pinname="Columns" slicecount="1" values="14">
   </PIN>
   <PIN pinname="Show SliceIndex" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Show Grid" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="|digital pins Input or Output|">
   </PIN>
   <PIN pinname="X Input Value" slicecount="14" values="1,1,0,0,0,0,0,0,0,0,0,0,0,0">
   </PIN>
   <PIN pinname="X Output Value" visible="1">
   </PIN>
   </NODE>
   <NODE id="23" nodename="I (Spreads)">
   <BOUNDS height="0" left="150" top="3435" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="[ From .." slicecount="1" values="130">
   </PIN>
   <PIN pinname=".. To [" slicecount="1" values="144">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <NODE id="22" nodename="Select (Value)">
   <BOUNDS height="0" left="135" top="3825" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Select" visible="1">
   </PIN>
   <PIN pinname="Input" visible="1">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="22" dstpinname="Input" srcnodeid="23" srcpinname="Output">
   </LINK>
   <NODE id="21" nodename="I (Spreads)">
   <BOUNDS height="0" left="1425" top="3390" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="[ From .." slicecount="1" values="200">
   </PIN>
   <PIN pinname=".. To [" slicecount="1" values="214">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <NODE id="20" nodename="Select (Value)">
   <BOUNDS height="0" left="1410" top="3810" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Select" visible="1">
   </PIN>
   <PIN pinname="Input" visible="1">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <NODE id="19" nodename="NOT (Boolean)">
   <BOUNDS height="0" left="1965" top="3390" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Input" visible="1">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="20" dstpinname="Input" srcnodeid="21" srcpinname="Output">
   </LINK>
   <LINK dstnodeid="20" dstpinname="Select" srcnodeid="19" srcpinname="Output">
   </LINK>
   <NODE componentmode="InABox" id="18" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="2055" top="4965" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="13725" top="7065" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="660" left="2055" top="4965" type="Box" width="675">
   </BOUNDS>
   <PIN pinname="Minimum" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Maximum" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Slider Behavior" slicecount="1" values="Toggle">
   </PIN>
   <PIN pinname="Show Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Slider" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="Y Input Value" slicecount="1" visible="1" values="1">
   </PIN>
   <PIN pinname="SliceCount Mode" slicecount="1" values="Input">
   </PIN>
   <PIN pinname="Columns" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Show SliceIndex" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Grid" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="||">
   </PIN>
   <PIN pinname="X Input Value" slicecount="1" values="1">
   </PIN>
   <PIN pinname="X Output Value" visible="1">
   </PIN>
   </NODE>
   <NODE id="17" nodename="Switch (Value Input)">
   <BOUNDS height="0" left="2085" top="6015" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Switch" visible="1">
   </PIN>
   <PIN pinname="Input 1" slicecount="1" values="150">
   </PIN>
   <PIN pinname="Input 2" slicecount="1" values="151">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="17" dstpinname="Switch" srcnodeid="18" srcpinname="Y Output Value">
   </LINK>
   <LINK dstnodeid="19" dstpinname="Input" linkstyle="VHV" srcnodeid="24" srcpinname="Y Output Value">
   </LINK>
   <LINK dstnodeid="22" dstpinname="Select" linkstyle="VHV" srcnodeid="24" srcpinname="Y Output Value">
   </LINK>
   <NODE id="16" nodename="Cons (Spreads)">
   <BOUNDS height="0" left="1080" top="7050" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Input 2" visible="1">
   </PIN>
   <PIN pinname="Input 1" visible="1">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   <PIN pinname="Input Count" slicecount="1" values="3">
   </PIN>
   <PIN pinname="Input 3" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="16" dstpinname="Input 3" srcnodeid="17" srcpinname="Output">
   </LINK>
   <LINK dstnodeid="16" dstpinname="Input 1" srcnodeid="22" srcpinname="Output">
   </LINK>
   <LINK dstnodeid="16" dstpinname="Input 2" srcnodeid="20" srcpinname="Output">
   </LINK>
   <NODE componentmode="Hidden" id="15" nodename="Merge (Value).v4p">
   <BOUNDS height="100" left="1500" top="7665" type="Node" width="100">
   </BOUNDS>
   <BOUNDS left="1500" top="7665" type="Box">
   </BOUNDS>
   <PIN pinname="Output" visible="1">
   </PIN>
   <PIN pinname="Value 1" visible="1">
   </PIN>
   <PIN pinname="Value 2" slicecount="2" visible="1" values="251,251">
   </PIN>
   <BOUNDS height="6615" left="6915" top="4350" type="Window" width="12945">
   </BOUNDS>
   <PIN pinname="Value 3" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="15" dstpinname="Value 1" srcnodeid="16" srcpinname="Output">
   </LINK>
   <NODE id="14" nodename="I (Spreads)">
   <BOUNDS height="0" left="8895" top="3000" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="[ From .." slicecount="1" values="161">
   </PIN>
   <PIN pinname=".. To [" visible="1">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <NODE componentmode="InABox" id="13" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="6810" top="3840" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="14025" top="7365" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="420" left="6810" top="3840" type="Box" width="555">
   </BOUNDS>
   <PIN pinname="Minimum" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Maximum" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Slider Behavior" slicecount="1" values="Toggle">
   </PIN>
   <PIN pinname="Show Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Slider" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="Y Input Value" visible="1">
   </PIN>
   <PIN pinname="SliceCount Mode" slicecount="1" values="Input">
   </PIN>
   <PIN pinname="Columns" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Show SliceIndex" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Grid" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="|disable reporting on all analog ins|">
   </PIN>
   <PIN pinname="X Input Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="X Output Value" visible="1">
   </PIN>
   </NODE>
   <NODE id="12" nodename="Switch (Value Input)">
   <BOUNDS height="0" left="7725" top="4935" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Switch" visible="1">
   </PIN>
   <PIN pinname="Input 1" visible="1">
   </PIN>
   <PIN pinname="Input 2" slicecount="1" values="160">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="12" dstpinname="Switch" srcnodeid="13" srcpinname="Y Output Value">
   </LINK>
   <NODE id="11" nodename="I (Spreads)">
   <BOUNDS height="0" left="8010" top="4530" type="Node" width="0">
   </BOUNDS>
   <PIN pinname=".. To [" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="12" dstpinname="Input 1" srcnodeid="11" srcpinname="Output">
   </LINK>
   <NODE id="10" nodename="NOT (Boolean)">
   <BOUNDS height="0" left="6735" top="3135" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Input" visible="1">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <NODE id="9" nodename="Cons (Spreads)">
   <BOUNDS height="0" left="7890" top="5475" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Input 1" visible="1">
   </PIN>
   <PIN pinname="Input 2" visible="1">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="9" dstpinname="Input 1" srcnodeid="12" srcpinname="Output">
   </LINK>
   <LINK dstnodeid="15" dstpinname="Value 3" srcnodeid="9" srcpinname="Output">
   </LINK>
   <NODE componentmode="InABox" id="8" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="7470" top="1410" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="15810" top="2310" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="240" left="7470" top="1410" type="Box" width="795">
   </BOUNDS>
   <PIN pinname="Y Input Value" slicecount="1" values="6">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="||">
   </PIN>
   </NODE>
   <NODE id="7" nodename="Add (Value)">
   <BOUNDS height="0" left="9060" top="2535" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Input 2" slicecount="1" values="161">
   </PIN>
   <PIN pinname="Input 1" visible="1">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="7" dstpinname="Input 1" srcnodeid="8" srcpinname="Y Output Value">
   </LINK>
   <LINK dstnodeid="14" dstpinname=".. To [" srcnodeid="7" srcpinname="Output">
   </LINK>
   <LINK dstnodeid="9" dstpinname="Input 2" srcnodeid="14" srcpinname="Output">
   </LINK>
   <NODE id="6" nodename="GT (Value)">
   <BOUNDS height="0" left="6720" top="2640" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Input 1" visible="1">
   </PIN>
   <PIN pinname="Output" visible="1">
   </PIN>
   </NODE>
   <LINK dstnodeid="6" dstpinname="Input 1" srcnodeid="8" srcpinname="Y Output Value">
   </LINK>
   <LINK dstnodeid="10" dstpinname="Input" srcnodeid="6" srcpinname="Output">
   </LINK>
   <NODE componentmode="InABox" id="5" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="1230" top="8505" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="4380" top="9780" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="240" left="1230" top="8505" type="Box" width="795">
   </BOUNDS>
   <PIN pinname="Y Input Value" visible="1">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="Output">
   </PIN>
   </NODE>
   <LINK dstnodeid="5" dstpinname="Y Input Value" srcnodeid="15" srcpinname="Output">
   </LINK>
   <NODE componentmode="InABox" id="4" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="390" top="735" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="14025" top="7365" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="375" left="390" top="735" type="Box" width="450">
   </BOUNDS>
   <PIN pinname="Minimum" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Maximum" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Slider Behavior" slicecount="1" values="Toggle">
   </PIN>
   <PIN pinname="Show Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Slider" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="Y Input Value" slicecount="1" visible="1" values="1">
   </PIN>
   <PIN pinname="SliceCount Mode" slicecount="1" values="Input">
   </PIN>
   <PIN pinname="Columns" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Show SliceIndex" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Grid" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="||">
   </PIN>
   <PIN pinname="X Input Value" slicecount="1" values="1">
   </PIN>
   <PIN pinname="X Output Value" visible="1">
   </PIN>
   </NODE>
   <NODE componentmode="InABox" id="3" nodename="IOBox (String)">
   <BOUNDS height="270" left="900" top="765" type="Node" width="885">
   </BOUNDS>
   <BOUNDS height="270" left="900" top="765" type="Box" width="885">
   </BOUNDS>
   <BOUNDS height="160" left="0" top="0" type="Window" width="215">
   </BOUNDS>
   <PIN pinname="Input String" slicecount="1" visible="0" values="|= is input|">
   </PIN>
   <PIN pinname="Output String" visible="0">
   </PIN>
   <PIN pinname="Show Grid" slicecount="1" values="0">
   </PIN>
   </NODE>
   <NODE componentmode="InABox" id="2" nodename="IOBox (Value Advanced)">
   <BOUNDS height="0" left="1965" top="750" type="Node" width="0">
   </BOUNDS>
   <BOUNDS height="160" left="14325" top="7665" type="Window" width="215">
   </BOUNDS>
   <BOUNDS height="375" left="1965" top="750" type="Box" width="450">
   </BOUNDS>
   <PIN pinname="Minimum" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Maximum" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Slider Behavior" slicecount="1" values="Toggle">
   </PIN>
   <PIN pinname="Show Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Slider" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Y Output Value" visible="1">
   </PIN>
   <PIN pinname="Y Input Value" slicecount="1" visible="1" values="0">
   </PIN>
   <PIN pinname="SliceCount Mode" slicecount="1" values="Input">
   </PIN>
   <PIN pinname="Columns" slicecount="1" values="1">
   </PIN>
   <PIN pinname="Show SliceIndex" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Show Grid" slicecount="1" values="0">
   </PIN>
   <PIN pinname="Descriptive Name" slicecount="1" values="||">
   </PIN>
   <PIN pinname="X Input Value" slicecount="1" values="0">
   </PIN>
   <PIN pinname="X Output Value" visible="1">
   </PIN>
   </NODE>
   <NODE componentmode="InABox" id="1" nodename="IOBox (String)">
   <BOUNDS height="270" left="2475" top="780" type="Node" width="885">
   </BOUNDS>
   <BOUNDS height="270" left="2475" top="780" type="Box" width="885">
   </BOUNDS>
   <BOUNDS height="160" left="300" top="300" type="Window" width="215">
   </BOUNDS>
   <PIN pinname="Input String" slicecount="1" visible="0" values="|= is output|">
   </PIN>
   <PIN pinname="Output String" visible="0">
   </PIN>
   <PIN pinname="Show Grid" slicecount="1" values="0">
   </PIN>
   </NODE>
   <NODE componentmode="InABox" id="0" nodename="IOBox (String)">
   <BOUNDS height="690" left="9285" top="1380" type="Node" width="3195">
   </BOUNDS>
   <BOUNDS height="690" left="9285" top="1380" type="Box" width="3195">
   </BOUNDS>
   <BOUNDS height="160" left="0" top="0" type="Window" width="215">
   </BOUNDS>
   <PIN pinname="Input String" slicecount="1" visible="0" values="|if you change this count make sure to&cr;&lf;set firtst the count to 0 ... and then to eg 5&cr;&lf;think this is little bug|">
   </PIN>
   <PIN pinname="Output String" visible="0">
   </PIN>
   <PIN pinname="Show Grid" slicecount="1" values="0">
   </PIN>
   </NODE>
   <LINK dstnodeid="13" dstpinname="Y Input Value" srcnodeid="10" srcpinname="Output">
   </LINK>
   <NODE nodename="IOBox (String)" componentmode="InABox" id="25">
   <BOUNDS type="Node" left="2070" top="4635" width="2550" height="270">
   </BOUNDS>
   <BOUNDS type="Box" left="2070" top="4635" width="2550" height="270">
   </BOUNDS>
   <BOUNDS type="Window" left="0" top="0" width="215" height="160">
   </BOUNDS>
   <PIN pinname="Input String" visible="0" slicecount="1" values="|enable reporting of digital inputs|">
   </PIN>
   <PIN pinname="Output String" visible="0">
   </PIN>
   <PIN pinname="Show Grid" slicecount="1" values="0">
   </PIN>
   </NODE>
   <NODE id="26" nodename="Length (String)">
   <BOUNDS height="0" left="7200" top="10530" type="Node" width="0">
   </BOUNDS>
   <PIN pinname="Input" visible="1" slicecount="1" values="text">
   </PIN>
   <PIN pinname="Count" visible="1">
   </PIN>
   </NODE>
   <NODE nodename="IOBox (String)" componentmode="InABox" id="27">
   <BOUNDS type="Node" left="7095" top="1080" width="1860" height="270">
   </BOUNDS>
   <BOUNDS type="Box" left="7095" top="1080" width="1860" height="270">
   </BOUNDS>
   <BOUNDS type="Window" left="0" top="0" width="215" height="160">
   </BOUNDS>
   <PIN pinname="Input String" visible="0" slicecount="1" values="|analog ins count|">
   </PIN>
   <PIN pinname="Output String" visible="0">
   </PIN>
   <PIN pinname="Show Grid" slicecount="1" values="0">
   </PIN>
   </NODE>
   </PATCH>